BEE058 Analog & Digital Communication Syllabus
AKTU B.Tech · 3rd Year · Unit-wise syllabus (effective 2024-25)
BEE058 Analog & Digital Communication (also written as KEE058) is a subject in the 3rd year of the AKTU B.Tech programme, prescribed by Dr. A.P.J. Abdul Kalam Technical University. It carries 3 credits. The syllabus is divided into 5 units: Unit II Angle Modulation and Noise, Unit III Pulse Modulation and Waveform coding Techniques, Unit IV Digital Modulation Techniques, Unit V Time Division Multiplexing and Introduction to Information Theory. The complete unit-wise topic list, course outcomes and reference books are given below, taken from the official AKTU syllabus effective from 2024-25.
BEE058 Subject Details
| Subject Code | BEE058 / KEE058 |
|---|---|
| Subject Name | Analog & Digital Communication |
| University | Dr. A.P.J. Abdul Kalam Technical University (AKTU) |
| Course | B.Tech (Bachelor of Technology) |
| Year / Semester | 3rd Year |
| Credits | 3 |
| Total Units | 5 |
| Scheme Effective From | 2024-25 |
| Last Verified | 2026-08-19 |
BEE058 Analog & Digital Communication Unit-Wise Syllabus
Official AKTU syllabus (effective 2024-25) — 5 units.
Unit 1
UNIT I Elements of communication system and its limitations, Amplitude modulation and detection, Generation and detection of DSB-SC, SSB and vestigial side band modulation, carrier acquisition AM transmitters and receivers, Superhetrodyne Receiver, IF amplifiers, AGC circuits, Frequency Division multiplexing.
Unit 2: Unit II Angle Modulation · Noise
Unit II Angle Modulation: Basic definition, Narrow-Band and wideband frequency modulation, transmission bandwidth of FM signals, Generation and detection of frequency modulation, Generation and detection of Phase Modulation. Noise: External noise, internal noise, noise calculations, signal to noise ratio.
Unit 3: Unit III Pulse Modulation · Waveform coding Techniques
Unit III Pulse Modulation: Introduction, sampling process, Analog Pulse Modulation Systems, Pulse Amplitude Modulation (PAM), Pulse width modulation (PWM) and Pulse Position Modulation (PPM). Waveform coding Techniques: Discretization in time and amplitude, Quantization process, quantization noise, Pulse code Modulation, Differential Pulse code Modulation, Delta Modulation and Adaptive Delta Modulation.
Unit 4: Unit IV Digital Modulation Techniques
Unit IV Digital Modulation Techniques: Types of digital modulation, waveforms for amplitude, frequency and phase shift keying, coherent and non-coherent methods for the generation of ASK, FSK and PSK. Comparisons of above digital modulation techniques.
Unit 5: Unit V Time Division Multiplexing · Introduction to Information Theory
Unit V Time Division Multiplexing: Fundamentals, Electronic Commutator, Bit/byte interleaving, TI carrier system, synchronization and signaling of TI, TDM and PCM hierarchy, synchronization techniques. Introduction to Information Theory: Measure of information, Entropy & Information rate, channel capacity, Hartley Shannan law, Huffman coding, shannan Fano coding. ELECTRICAL ENGINEERING
BEE058 Course Outcomes
- Level, KL
- Pre-requisites of course: Basic Signals & Systems.
- K2
- K2
- Upon the completion of the course, the student will be able to: K2
- CO 1 Understand the Amplitude Modulation in communication system. K3
- CO2 Comprehend the Frequency & Phase modulation.
- CO3 Realize the Pulse Modulation Techniques.
- CO4 Get the Digital Modulation Techniques and their use in communication system.
- CO5 Apply the concept of Information Theory in Communication Engineering.
- K1 – Remember K2 – Understand K3 – Apply K4 – Analyze K5 – Evaluate K6 – Create
BEE058 Reference Books
- B.P. Lathi, “Modern Digital and Analog Communication Systems”, 4th Edition, Oxford
- G.Kennedy and B. Davis,” Electronic Communication Systems” 4th Edition, McGraw Hill
- R.P. Singh & S.D. Sapre, “Communication Systems Analog and Digital”, 3th Edition,
- John G. Proakis, "Communication Systems Engineering 2nd Edition, Pearson Education,
- H. Taub, D L Schilling, Gautam Saha, “Principles of Communication”, 4th Edition,
Frequently Asked Questions about BEE058
What is the syllabus of BEE058 Analog & Digital Communication?
The AKTU BEE058 Analog & Digital Communication syllabus is divided into 5 units: Unit II Angle Modulation and Noise; Unit III Pulse Modulation and Waveform coding Techniques; Unit IV Digital Modulation Techniques; Unit V Time Division Multiplexing and Introduction to Information Theory. The complete topic list for each unit is published on this page, taken from the official Dr. A.P.J. Abdul Kalam Technical University syllabus effective from 2024-25.
How many units are there in BEE058?
BEE058 Analog & Digital Communication has 5 units in the AKTU syllabus and 3 credits.
Is BEE058 the same subject as KEE058?
Yes. AKTU renumbered its B.Tech subject codes from the 2022-23 session onwards, so the same subject appears as BEE058 and KEE058 depending on the scheme year. The syllabus content is the same.
How many credits is BEE058 worth?
BEE058 Analog & Digital Communication carries 3 credits in the AKTU evaluation scheme.
Where can I download BEE058 previous year question papers?
AKTU B.Tech previous year question papers for every semester are available to download free on Ryzenstudy, with no login or registration required.
Is this the official AKTU syllabus for BEE058?
Yes. Every topic on this page is taken from the official Dr. A.P.J. Abdul Kalam Technical University syllabus document (AKTU B.Tech 3rd Year Electrical Engineering Syllabus), effective from 2024-25. A direct link to the original AKTU PDF is provided at the top of this page. Last verified on 2026-08-19.
Related AKTU Syllabus
Source: Dr. A.P.J. Abdul Kalam Technical University official syllabus — AKTU B.Tech 3rd Year Electrical Engineering Syllabus, effective from 2024-25. Ryzenstudy is not affiliated with AKTU. Content last verified on 2026-08-19.